DSL (Eng. Digital Subscriber Loop) - a digital subscriber loop, the family of broadband access to the Internet technology. The standard data reception speed fluctuates between128 Kbps up to 24,000 Kbps, depending on the applied DSL technology and its level. For ADSL technology, the speed of dispatching data is lower than its speed of data reception, but symmetrical to SDLS. Joseph W.Lechleitter, inventor of DSL modem and employer of Bellcore, demonstrated the construction projects of such devices in the 80s.
May
13
* Login to the TM Bills Page
* Select “Change Password” from Account Management (near the bottom of the page)
May
3
Network Interface Card
Posted by admin in Basic, Do-IT-Yourself, Info, Troubleshooting, wireless on 05 3rd, 2009| | No Comments »
Streamyx info,
We need a Network Interface Card (NIC) when we using a RJ14 cable to the streamyx modem in order for your PC to communicate with the modem. Another choices of coummunication are wirelless and USB.
Check status of NIC
NIC is installed – RJ45 port
- Right click My computer icon –> properties -> Hardware-> Device Manager.
- check on Network Adapters
Apr
20
The ZTE ZXDSL 831 is a modem/router supplied by TM. It works as a modem(bridge) by default but you can change it to a router. In router mode, you don’t need to dial StreamyX anymore. The router will dial it for you automatically.
Configure to router mode.
1. Login to http://192.168.1.1 with the username and password. If you don’t know the default username and password, please view ZTE ZXDSL 831 default password.
2. When logged in, click on the WAN tab.
3. Click on “ATM VC” and make sure interface aal5-0 VPI = 0 & VCI = 35, MUX = LLC, Max proto = 2.
4. Click on “PPP” and then a new interface.
5. Set the new interface as PPP interface = 0 ATM VC = aal5-0, protocol = PPoE, use DNS = enable, security = PAP. Don’t forget to set your Streamyx username@streamyx and also your password. Submit after that.
6. After that, click on “Admin” and then “Commit” and then “Reboot”.
Feb
20
To check connectivity and latency by extended ping to DNS
Start — Run — cmd
open DOS prompt
ping 202.188.1.5
ping 202.188.1.5 –t or
ping 202.188.1.5 –t –n 30
To stop . Press CTRL+C
Value to check is % packet Loss and Average time
